16 bit transient recorder
THIS PRODUCT IS END-OF-LIFE. Show more about end-life-products policy.
16 bit transient recorder
The MC.47xx series allows recording of eight or sixteen channels with sampling rates of 100 kS/s up to 500 kS/s. These cards offer outstanding A/D features both in resolution and speed for CompactPCI and PXI. Using the MC.47xx series it is possible to set-up systems with up to 256 synchronous 16 bit channels of data recording. The enhanced FIFO engine is capable of streaming even 16 channels with 500 kS/s sustained to memory or harddisk.
Facts & Features:
- Up to 100 kS/s on 8 channels
- Simultaneously sampling on all channels
- Separate ADC and amplifier per channel
- Complete on-board calibration
- 8 input ranges: +/-50 mV up to +/-10 V
- Up to 256 MSample on-board memory
- 32 MSample standard memory installed
- Window and pulsewidth trigger
- Synchronization possible
- CompactPCI 6U compatible
- Robust industrial connections
- Up to 16 cards can be synchronized
- Production tests
- Massive multi-channel systems
- High-speed temperature and strain gauge measurements
The cascading option synchronizes up to 4 Spectrum boards internally. It's the simplest way to build up a multi channel system. On the internal synchronisation bus clock and trigger signals are routed between the different boards. All connected boards are then working with the same clock and trigger information. There is a phase delay between two boards of about 500 picoseconds when this synchronization option is used.
Extra I/O (Optional)
The Extra I/O module adds 24 additional digital I/O lines and 4 analog outputs on an extra connector. These additional lines are independent from the standard function and can be controlled asynchronously. There is also an internal version available with 16 digital I/Os and 4 analog outputs that can be used directly at the rear board connector.
FIFO modeThe FIFO mode is designed for continuous data transfer between measurement board and PC memory (with up to 100 MByte/s) or hard disk. The control of the data stream is done automatically by the driver on interrupt request. The complete installed on-board memory is used for buffer data, making the continuous streaming extremely reliable.
Star-Hub (Optional)The star-hub is an additional module allowing the phase stable synchronization of up to 16 boards in one system. Independent of the number of boards there is no phase delay between all channels. The star-hub distributes trigger and clock information between all boards. As a result all connected boards are running with the same clock and the same trigger. All trigger sources can be combined with OR/AND allowing all channels of all cards to be trigger source at the same time. The star-hub is available as 5 card and 16 card version. The 5 card version doesn't need an extra slot.
The data acquisition boards offer a wide variety of trigger modes. Besides the standard signal checking for level and edge as known from oscilloscopes it's also possible to define a window trigger. Trigger conditions can be combined with logical conjunctions like OR to adopt to different application scenarios.
All boards can be triggered using an external TTL signal. It's possible to use positive or negative edge also in combination with a programmable pulse width. An internally recognized trigger event can - when activated by software - be routed to the trigger connector to start external instruments.
TimestampThe timestamp option writes the time positions of the trigger events in an extra memory. The timestamps are relative to the start of recording, a defined zero time, externally synchronized to a radio clock, or a GPS receiver. With this option acquisitions of systems on different locations can be set in a precise time relation.
Using a dedicated connector a sampling clock can be fed in from an external system. It's also possible to output the internally used sampling clock to synchronize external equipment to this clock.
Reference ClockThe option to use a precise external reference clock (normally 10 MHz) is necessary to synchronize the board for high-quality measurements with external equipment (like a signal source). It's also possible to enhance the quality of the sampling clock in this way. The driver automatically generates the requested sampling clock from the fed in reference clock.
The on-board calibration can be run on user request and calibrates the amplifier against a dedicated internal high precision calibration source. After this calibration data is stored permanently in an on-board EEPROM and is automatically used for further acquisitions.
Programmable Input AmplifiersThe analog inputs can be adapted to real world signals using individual settings for each channel. A large number of different input ranges allow to adopt perfectly to the real world signals.
This standard driver is included in the card delivery and it is possible to get the newest driver version free of charge from our homepage at any time. There are no additional SDK fees for the classical text-based programming. All boards are delivered with drivers for Windows 7, Windows 8, Windows 10 and Windows 11, all 32 bit and 64 bit.
|Product||Channels||Max. Samplerate||Max. Bandwidth|
|MC.4711||16||100 KS/s||50 KHz|
|MC.4720||8||250 KS/s||125 KHz|
|MC.4721||16||250 KS/s||125 KHz|
|MC.4730||8||500 KS/s||250 KHz|
|MC.4731||16||500 KS/s||250 KHz|
|On different platforms||Bus||Max. Bus Transfer speed|
|M2i.4710-Exp||PCI Express x1||160 MByte/s|
Data sheet of the MC.47xx family
Manual of MC.47xx family
MI / MC Timestamp module datasheet
MI / MC StarHub module datasheet
|Extra I/O Datasheet||
MI / MC Extra I/O module datasheet
|SBench 6 data sheet||
Data sheet of SBench 6
Manual for MATLAB drivers for MI/MC/MX
LabVIEW Manual for MC/MX.47xx
|SBench 6 Manual||
Manual for SBench 6
WINDOWS DRIVER + SOFTWARE
MI/MC/MX/PCI.xxx Windows 98/NT 32 Bit Drivers
MI/MC/MX/PCI.xxx Windows XP/Vista 32 Bit Drivers
MI/MC/MX/PCI.xxx Windows XP/Vista 64 Bit Drivers
MI/MC/MX/PCI.xxx Windows 7/8 32 Bit Drivers
MI/MC/MX/PCI.xxx Windows 7/8 64 Bit Drivers
MI/MC/MX/PCI.xxx Windows 10 32 Bit Drivers
MI/MC/MX/PCI.xxx Windows 10/11 64 Bit Drivers
C/C++ driver header and library files
SBench 5 Installer
SBench 6 (32-bit) Installer / Windows 7, 8, 10
SBench 6 (64-bit) Installer / Windows 7, 8, 10, 11
MI / MC / MX MATLAB driver + examples
MI / MC / MX LabVIEW Driver
MI / MC / MX Examples for C/C++, Delphi, VB, LabWindows/CVI, ...
LINUX DRIVER + SOFTWARE
|Linux Driver Complete||
MI / MC / MX Linux 32 bit and 64 bit Drivers
SBench 6 Linux 32 (.rpm)
SBench 6 Linux 64 (.rpm)
SBench 6 Linux 32 (.deb)
SBench 6 Linux 64 (.deb)
SBench6 Jetson (.deb)
|MICX Examples for Linux||
MI / MC / MX Linux Examples (C/C++)
|General Digitizer Introduction||
General Introduction to Waveform Digitizers
|High-Res High BW Digitizers||
Advantages of High Resolution in High Bandwidth Digitizers
|Digitizer Acquisition Modes||
Using modular Digitizer Acquisition Modes
Proper Use of Digitizer Front-End Signal Conditioning
|Trigger and Sync||
Trigger, Clock and Synchronization Details at high-speed Digitizers
|SBench 6 Introduction||
SBench 6 - Data Acquisition and Analysis of Digitizer Data
|Signal Processing Tools||
Using Signal Processing Tools to enhance Digitizer Data
Mechanical Measurements Using Digitizers
Power Measurements Using Modular Digitizers
|Using Probes & Sensors||
Using Probes and Sensors with Modular Digitizers
|Teaming AWG with Digitizer||
Teaming an Arbitrary Waveform Generator with a Modular Digitizer
|Common Digitizer Setup Problems||
Application Note: Common Digitizer Setup Problems to avoid
|AN Amplitude Resolution||
Application Note: The Amplitude Resolution of Digitizers and how it affects Measurements