en
  • English
  • German
  • Chinese
M2p.6533-x4 16 bit Arbitrary Waveform Generator - SPECTRUM Instrumentation
M2p.6533-x4
16 bit Arbitrary Waveform Generator
Parameter Search Sales Contact Support

Product:

M2p.6533-x4

16 bit Arbitrary Waveform Generator

Description:

The M2p.65xx series offers different versions of arbitrary waveform generators for PCI Express with a maximum output rate of 125 MS/s. These boards allow to generate freely definable waveforms on several channels synchronously. With one of the synchronization options the setup of synchronous multi channel systems is possible as well as the combination of arbitrary waveform generator with digitizers of the M2p product family. The 512 MSample on-board memory can be used as arbitrary waveform storage or as a FIFO buffer continuously stream data via the PCIe interface. Importantly, the high-resolution 16-bit DACs deliver four times the resolution than AWGs using older 14-bit technology.

Facts & Features:

  • Up to 40 MS/s on 8 channels
  • Output level ±6 V into High Impedance
  • Output level ±3 V into 50 Ohm
  • 16 bit arbitrary waveform generator
  • Simultaneous signal generation on all channels
  • Fixed trigger to output delay
  • Single-Shot, Loop, Gated, Sequence Mode
  • 4 digital outputs (Marker) standard, 16 more as option
  • Synchronization of up to 16 cards
  • Internal Synchronization with matching Digitizers
  • PCIe x4 Gen1 Interface
  • Works with x4/x8/x16* PCIe slots
  • Software compatible to PCI
  • Sustained streaming mode up to 700 MB/s
  • Direct data transfer to / from CUDA GPU using SCAPP

Product-Video:

Technical Drawing:

Application examples:

  • Antenna Arrays
  • Research and Development
  • Stimulus-Response Tests
  • Closed Loop Tests

FIFO mode

The FIFO mode is designed for continuous data transfer between measurement board and PC memory or hard disk. The read (acquisition) transfer rate reached depends on the motherboard and can be up to 700 MByte/s on a PCI Express x4 Gen1 slot. The control of the data stream is done automatically by the driver on interrupt request. The complete installed on-board memory is used for buffer data, making the continuous streaming extremely reliable.

Repeated Output

When repeated output is used the data of the on-board memory is replayed continuously until a stop command is executed or N times. As trigger source one can use the external TTL trigger or the software trigger.

Sequence Replay Mode

The sequence mode allows to split the card memory into several data segments of different length. These data segments are chained up in a user chosen order using an additional sequence step memory with the ability to program loops and triggers and to reload data while output is running.

Single Restart

When this mode is activated the data of the on-board memory will be replayed once after each trigger event. As Trigger source one can use the external TTL or software trigger.

Singleshot Output

When singleshot output is activated the data of the on-board memory is replayed exactly one time. As trigger source one can use the external TTL trigger or the software trigger.

Star-Hub (Optional)

The star-hub is an additional module allowing the phase stable synchronization of up to 16 boards in one system. Independent of the number of boards there is no phase delay between all channels. The star-hub distributes trigger and clock information between all boards. As a result all connected boards are running with the same clock and the same trigger. All trigger sources can be combined with OR allowing all channels of all cards to be trigger source at the same time. The star-hub is available as either piggy-back version (extending the width of the card) or as extension version (extending the length of the card to full length).

Digital Pulse Generator Option

The digital pulse generator option adds 4 internal independent pulse generators with programmable duty cycle, output frequency, delay and number of loops. These pulse generators can be triggered by software, hardware trigger or can trigger each other allowing to form complex pulse schemes to drive external equipment or experiments. The pulse generators can be outputted on the existing multi-XIO lines or can be used to trigger the instrument internally. Time resolution of the pulse generator depends on the cards type and the selected sampling rate and can be found in the technical data section.

External Trigger

All boards can be triggered using a separate external trigger signal with a two level programmable window comparator and a second separate external trigger with a single programmable level comparator. It's possible to use positive or negative edge. An internally recognized trigger event can - when activated by software - be routed to a multi purpose i/o connector to start external instruments.

Gated Replay

The Gated Sampling option allows data replay controlled by an external gate signal. Data is only replayed if the gate signal has a programmed level.

Multi Purpose I/O

The card offers universal multi purpose I/O lines, which can be separately programmed as either input or output. These lines can be used as additional TTL trigger inputs for more complex trigger conditions.

Multiple Replay

The Multiple Replay option allows the fast repetition output on several trigger events without restarting the hardware. With this option very fast repetition rates can be achieved. The on-board memory is divided in several segments of same size. Each of them is generated if a trigger event occurs.

External Clock

Using a dedicated connector a sampling clock can be fed in from an external system. It's also possible to output the internally used sampling clock to synchronize external equipment to this clock.

High Precision PLL

The internal sampling clock of the card is generated using a high precision PLL. This powerful device allows to select the sampling rate with a fine step size making it possible to perfectly adopt to different measurement tasks. Most other cards on the market only allow the setup of fixed sampling rates like 100 MS/s, 50 MS/s, 25 MS/s, 10 MS/s, ... without any possibility to set the sampling rate to any value in between.

Reference Clock

The option to use a precise external reference clock (normally 10 MHz) is necessary to synchronize the board for high-quality measurements with external equipment (like a signal source). It's also possible to enhance the quality of the sampling clock in this way. The driver automatically generates the requested sampling clock from the fed in reference clock.

Digital Outputs/Marker Outputs

Additional synchronous digital channels (markers) can be replayed phase-stable with the analog data. When this mode is active up to four additional digital marker outputs can be used by reducing the analog resolution of the D/A converter. As an option 16 more digital outputs are available.

Programmable Amplitude

The Spectrum Arbitrary Waveform Generators are equipped with a very wide programmable output amplitude. This allows to adapt the output signal level to the needs of the stimulated device while also having the maximum output resolution available for the signal.

3rd Party Drivers

A lot of third-party products are supported by the Spectrum driver. Choose between LabVIEW, MATLAB, LabWindows/CVI and IVI. All drivers come with examples and detailed documentation.

Programming Examples

Programming examples for C++, Delphi, Visual Basic, C#, VB.Net, Java, Python, Julia and LabWindows/CVI are delivered with the driver. Due to the simple interface of the driver, the integration in other programming languages or special measurement software is an easy task.

Linux

All cards are delivered with full Linux support. Pre compiled kernel modules are included for the most common distributions like RedHat, Fedora, Suse, Ubuntu or Debian. The Linux support includes SMP systems, 32 bit and 64 bit systems, versatile programming examples for Gnu C++ as well as the possibility to get the driver sources for own compilation.

Remote Server (Optional)

Using the Spectrum Remote Server it is possible to access the M2p/M2i/M3i/M4i/M4x card(s) installed in one PC (server) from another PC (client) via local area network (LAN), similar to using a digitizerNETBOX. To operate it the remote server option has to be activated by a software license for any of the Spectrum cards in the remote system.

SBench6

SBench 6 is a powerful and intuitive interactive measurement software. Besides the possibility to commence the measuring task immediately, without programming, SBench 6 combines the setup of hardware, data display, oscilloscope, transient recorder, waveform generator, analyzing functions, import and export functions under one easy-to-use interface.

SCAPP - CUDA Interface (Optional)

The SDK option allows to directly transfer data between the Spectrum card and a NVIDA CUDA GPU card. The GPU card is optimized for parallel data processing. The package comes with a number of detailed examples like FFT or block average.

Windows

This standard driver is included in the card delivery and it is possible to get the newest driver version free of charge from our homepage at any time. There are no additional SDK fees for the classical text-based programming. All boards are delivered with drivers for Windows 7, Windows 8, Windows 10 and Windows 11, all 32 bit and 64 bit.

Related products
Product Channels Max. Samplerate Max. Bandwidth
M2p.6530-x4 1 40 MS/s 20 MHz
M2p.6531-x4 2 40 MS/s 20 MHz
M2p.6536-x4 4 40 MS/s 20 MHz
M2p.6540-x4 1 40 MS/s 20 MHz
M2p.6541-x4 2 40 MS/s 20 MHz
M2p.6546-x4 4 40 MS/s 20 MHz
M2p.6560-x4 1 125 MS/s 60 MHz
M2p.6561-x4 2 125 MS/s 60 MHz
M2p.6566-x4 4 125 MS/s 60 MHz
M2p.6568-x4 8 125 MS/s 60 MHz
M2p.6570-x4 1 125 MS/s 60 MHz
M2p.6571-x4 2 125 MS/s 60 MHz
M2p.6576-x4 4 125 MS/s 60 MHz
Other platforms
On different platforms Bus Max. Bus Transfer speed
DN2.653-16 Ethernet 70 MByte/s
DN6.653-24 Ethernet 70 MByte/s
DN6.653-32 Ethernet 70 MByte/s
DN6.653-40 Ethernet 70 MByte/s
DN6.653-48 Ethernet 70 MByte/s

Streaming Systems (Optional)

Combining a number of Spectrum M2p/M2i/M3i/M4i/M5i PCIe digitizers with a Tera-Store Data Streaming solution allows the capture and storage of long complex signals for extended periods of time. With systems available offering from 1 to 32 TB of storage and streaming rates up to 3 GB/s signals can be digitized and stored seamlessly for hours on end.

Documents

M2p.65xx Datasheet

Data sheet of the M2p.65xx series

23.02.20241 M
M2p.65xx Manual

Manual of M2p.65xx family

23.02.202415 M
IVI Driver Manual

Short Manual for IVI Driver

21.02.2022532 K
M2p LabVIEW Manual

Manual for LabVIEW drivers for M2p

08.12.20235 M
MATLAB Manual

Manual for MATLAB driver M2p/M4i/M4x/M5i/M2i/M3i/DN2/DN6

13.12.20231 M
SCAPP Manual

SCAPP Manual

08.12.2023618 K

WINDOWS DRIVER + SOFTWARE

Driver Win7/8/10/11

M2p/M4i/M4x/M5i/M2i/M3i/DN2/DN6 driver for Windows 7, 8, 10, 11 (32/64 bit)

7.0023.02.20245 M
c_header

C/C++ driver header and library files

7.0023.02.202443 K
IVI FGen

IVI Driver for IVI FGen class (32 bit)

23.02.20243 M
Control Center (32-bit)

Spectrum Control Center (32-bit) / Windows 7, 8, 10

2.3523.02.202422 M
Control Center (64-bit)

Spectrum Control Center (64-bit) / Windows 7, 8, 10, 11

2.3523.02.202425 M
SBench6 (32-bit)

SBench 6 (32-bit) Installer / Windows 7, 8, 10

6.5.0723.02.202436 M
SBench6 (64-bit)

SBench 6 (64-bit) Installer / Windows 7, 8, 10, 11

6.5.0723.02.202439 M
Remote Server Windows

Windows Installer for Remote Server Option

23.02.202413 M
LabView driver

M2i/M2p/M3i/M4i/M4x/M5i/DN2/DN6 LabView driver installer

23.02.202419 M
Matlab driver

M2p/M4i/M4x/M5i/M2i/M3i/DN2/DN6 Matlab driver + examples installer

23.02.20247 M
Examples for Windows

Windows Examples (C/C++, .NET, Delphi, Java, Python, Julia ...)

7.0023.02.20242 M

LINUX DRIVER + SOFTWARE

Linux Driver Complete

M2p/M4i/M4x/M5i/M2i/M3i drivers (Kernel + Library) for Linux 32 bit and 64 bit

7.0023.02.202412 M
Linux Driver Library

Driver libraries (no Kernel) for Linux 32 bit and 64 bit

7.0023.02.20249 M
Remote Server Linux

Spectrum Remote Server Linux Installer Package

23.02.202412 K
Control Center

Spectrum Control Center

2.3507.03.202457 M
SBench6

SBench 6 Linux 32 (.rpm)

6.5.0723.02.202426 M
SBench6

SBench 6 Linux 64 (.rpm)

6.5.0723.02.202426 M
SBench6

SBench 6 Linux 32 (.deb)

6.5.0723.02.202423 M
SBench6

SBench 6 Linux 64 (.deb)

6.5.0723.02.202422 M
SBench6

SBench6 Jetson (.deb)

6.5.0723.02.20248 M
MATLAB Driver

Drivers + examples for MATLAB for Linux (DEB + RPM)

23.02.2024183 K
Examples for Linux

Linux Examples (C/C++, Python, Julia ...)

7.0023.02.2024556 K

Firmware

Firmware Update (Windows)

M2i/M2p/M3i/M4i/M4x/M5i firmware update (Windows)

23.02.202422 M
Firmware Update (Linux)

M2i/M2p/M3i/M4i/M4x/M5i firmware update (Linux)

23.02.202430 M

Case Studies

MRI Scanner for Babies

Shrunken MRI scanner helps in saving lives of sick babies

21.02.2022195 K
CS BYU Underwater Acoustics Lab

Case Study Sound waves studied in a simulated ocean with high-precision PCIe measurement cards

18.11.2022469 K

Product Notes

Trigger and Sync

Trigger, Clock and Synchronization Details at high-speed Digitizers

21.02.20221 M
Digitizer Software Integration

Software Support for Modular Digitizers

21.02.2022724 K
SBench 6 Introduction

SBench 6 - Data Acquisition and Analysis of Digitizer Data

21.02.20221 M
AWG Waveforms

Creating AWG Waveforms in SBench 6 using Equations

21.02.2022479 K
Create & Capture AWG Waveforms

Creating , Capturing and Transferring Waveforms for AWG's using SBench 6

21.02.20222 M

Application Notes

RF Measurements

RF Measurements using a modular Digitizer

21.02.2022838 K
Teaming AWG with Digitizer

Teaming an Arbitrary Waveform Generator with a Modular Digitizer

21.02.2022919 K
Introduction to Modular Arbitrary Function Generators

An Introduction to Modular Arbitrary Function Generators

21.02.2022701 K
Arbitrary Waveform Generator Operating Modes

Using Arbitrary Waveform Generator Operating Modes Effectively

21.02.2022481 K
AN Closed Loop Digitizer+AWG

Application Note: Closed Loop Tests with Digitizer and AWG and CUDA-GPU

21.02.20222 M
AN Multi-Channel T&M Systems

Easy creation of customized multi-channel, multi-functional T&M systems

21.02.20222 M
Contact

On location for you. Choose your region.

Europe USA Asia
Contact Europe
Phone +49 (0)4102 6956-0
Fax +49 (0)4102 6956-66
E-Mail info@spec.de
Contact USA
Phone +1 (201) 562-1999
Fax +1 (201) 820-2691
E-Mail sales@spectrum-instrumentation.com
Contact Asia
Phone +61 402 130 414
E-Mail greg.tate@spectrum-instrumentation.com
Support

Request support. We are happy to help.

Support
powered by webEdition CMS