Back
Version 6.07 Build 21512 of 6th December 2023
New File Versions
- Library - DLL V6.07
- M4i Linux Kernel V3.06
- M2i Linux Kernel V1.73
New Features
- [SPCMDRV-3244] Implementation of M5i Starhub
- [SPCMDRV-3347] Add new cards M5i.3360 and 3367
- [SPCMDRV-3348] Support for M2p.59xx hardware version 5 (new relay drivers)
- [SPCMDRV-3356] Create C/C++ example for DDS
- [SPCMDRV-3400] Support for Fedora 39
- [SPCMDRV-3403] New GetParam and SetParam functions with char*, reworked examples
- [SPCMDRV-3364] Allow to set SPC_READDIGITAL to zero on cards that do not use that register normally
- [SPCMDRV-3389] Log does not show version info for Win11 >= 22H2
- [SPCMDRV-3402] Allow read-out of card type and serial number if some error occurs at the internal reset command
- [SPCMDRV-3404] Add more info if setting a register returns ERR_VALUE
- [SPCMDRV-3406] New register to read number of XIO lines on the card
- [SPCMDRV-3409] M5i.33: allow two more SR PLL base frequencies (and the divided ones) and change PLL loop bandwith to 4 kHz (less sync compound jitter)
- [SPCMDRV-3410] Netbox only: Do not expose PHP version in HTTP header
- [SPCMDRV-3411] Netbox only: Do not expose apache version in HTTP header
- [SPCMDRV-3412] Netbox only: Store software license of card in Netbox to allow the read-out even if the card is locked
Fixed Bugs
- [SPCMDRV-3351] 59xx sync-compounds: example "simple_sync_rec_fifo.cpp" set a to slow SR
- [SPCMDRV-3352] 59xx sync-compounds: a to low SR is not corrected, instead program crash at cardstart
- [SPCMDRV-3354] Open NETBOX cards in loop: driver hangs at open first none existent card
- [SPCMDRV-3361] Close NETBOX cards after recording start produce an error: driver hangs
- [SPCMDRV-3369] DDS XIO Output unwanted Latch Pulse during Reset
- [SPCMDRV-3379] Driver can "plug" the demo cards to incorrect starhub connectors
- [SPCMDRV-3383] M5i Clk Out frequency must not relate to programmed samplerate, but to resulting clock rate for ADC
- [SPCMDRV-3390] 22xx Cards with new hardware version sample garbage data when using SpecialClock mode and 1GSps or divided frequencies
- [SPCMDRV-3391] Opening Netbox via name instead of IP can crash
- [SPCMDRV-3392] Possible problem with IPv6 addresses and Netbox or Remote Server
- [SPCMDRV-3393] Using IPv6 in VISA string does not work
- [SPCMDRV-3394] Sometimes the driver resolves a host name to IPv6
- [SPCMDRV-3405] Check for stepsize is not correct under all circumstances
- [SPCMDRV-3419] M4i 66xx wrong return value for SPC_XIO_PULSEGEN_CLOCK at 625 MHz