Back
Version 6.02 Build 20444 of 10th November 2022
New File Versions
- Library - DLL V6.02
- M4i Linux Kernel - V3.02
- M2i Linux Kernel - V1.69
New Features
- [SPCMDRV-3124] Add support for M5i Block Average firmware option
- [SPCMDRV-3139] Add support for level selective avaraging
- [SPCMDRV-3169] Add support for new Starhub PCB V1.1 hardware version
- [SPCMDRV-3136] Add M5i.33 and DNx.59 to list of supported devices for IVI driver
- [SPCMDRV-315] Allow continuous memory option ContMem > 4MB on linux systems
- [SPCMDRV-2570] Eleminate strange log file entries at NETBOX communication
- [SPCMDRV-2989] Better error information at wrong/missing RDMA installation.
- [SPCMDRV-3123] Allow "activation" of 50 ohm termination on M5i.33xx to suppress error messages
- [SPCMDRV-3129] Check fan speed together with temperature in spcm_hOpen()
- [SPCMDRV-3131] Store Type and SN in case fan or temperature error during spcm_hOpen()
- [SPCMDRV-3142] Make order of parameters in log file output of DefTransfer match the order in the code
Fixed Bugs
- [SPCMDRV-2571] Read of NETBOX MAC wrong
- [SPCMDRV-2758] Invalid samplerate combination creates unhelpful log entry
- [SPCMDRV-3122] RDMA buffers with length != x* 64kiB not handled correctly
- [SPCMDRV-3125] rec_fifo_multi_poll example does not use aligned memory
- [SPCMDRV-3130] Fan check for M5i not active
- [SPCMDRV-3134] Multiple recording example for Matlab causes error with M5i
- [SPCMDRV-3143] If WRITESETUP is used after SPC_SYNC_ENABLEMASK but before the Starhub is programmed the cards do not trigger
- [SPCMDRV-3144] Linux: Library DEB package for ARM64 does not contain library files
- [SPCMDRV-3146] Card does not trigger anymore if trigger delay is 64GS or higher
- [SPCMDRV-3151] Program hangs at card close if DefTransfer is used with DIR_CARDTOGPU but kernel does not support RDMA
- [SPCMDRV-3154] Uninitialized variable for number of samples when using 32bit Average mode
- [SPCMDRV-3155] rec_std_average.cpp The sampled data is not divided by the averagecount (lAveragesPerSegment)
- [SPCMDRV-3163] Wake on lan does not work on Windows-PCs with multiple network interfaces
- [SPCMDRV-3165] Rare possibility of failing ADC clock phase calibration after enabling/disabling clock output on M4i.44xx cards
- [SPCMDRV-3166] Rare possibility of incorrect samples after changes to clock settings on 445x and 448x cards
- [SPCMDRV-3170] Sometimes connection of M4i to starhub is not correctly detected