Back
Version 5.10 Build 16497 of 16th October 2019
New File Versions
- Library - DLL V5.10
- M2i Kernel Linux V1.57
- M4i Kernel Linux V2.09
- Control Center V2.14
Improvements
- [SPCMDRV-2522] Add support for M2p.65xx high voltage modules (654x, 657x)
- [SPCMDRV-2546] Add support for M2p.591x, DN2.591, DN6,591x
- [SPCMDRV-1906] Setup mail to support instead of link to support formular
- [SPCMDRV-2549] Added replacements for M2i.20, M2i.60, M2i.7x, M3i.21 to card list
- [SPCMDRV-2572] Linux: update of Kernel makefiles for Kernel > 5.3
- [SPCMDRV-2564] New python example for synchronized output
- [SPCMDRV-1310] Shutdown of Netbox using software command
- [SPCMDRV-2497] Clarifiy that "no card found" warning on Linux is no problem for Netboxes
- [SPCMDRV-2521] Support for SPCM_FEAT_DIG16_* feature on demo cards
- [SPCMDRV-2524] Allow 400 MS/s and dividions of it with synced 445x
- [SPCMDRV-2525] Show messagebox with link to knowledge base article if Netbox Discovery does not find any device
- [SPCMDRV-2527] Logfile: add SN to "M4i power monitor" driver line
- [SPCMDRV-2537] Use COUPLING_AC or COUPLING_DC constants as value for ACDC registers to enhance readability
- [SPCMDRV-2538] Use CHANNELx mask constants as value for channel enable settings to avoid confusion of number vs. mask (when using 1 for one channel)
- [SPCMDRV-2544] Respect sampling rate if demo data calculation is fast enough
- [SPCMDRV-2553] Also allow output of effective sample rate on every XIO line additionally to the possible faster oversampling clock only available on X0
- [SPCMDRV-2555] Add Netbox Debug Info package to web server
- [SPCMDRV-2556] Data type in some driver internal GetParam calls not consistently used
- [SPCMDRV-2563] New register to read PLL state of running card
Fixed Bugs
- [SPCMDRV-2381] Some features not available when using remote Server instead of "real" Netbox
- [SPCMDRV-2507] SPC_CLOCKOUTFREQUENCY returns 0 for M2p.65xx
- [SPCMDRV-2517] Control Center: Sometimes cards are mixed up after discovery
- [SPCMDRV-2520] Control Center: Pressing F5 with discovered cards creates additional entry for each remote card
- [SPCMDRV-2530] Sync: status read over sync-handle prints wrong values in log-file
- [SPCMDRV-2531] M4i sync: reset SH-carier directly prevents all following sync-compound starts
- [SPCMDRV-2535] Netbox Webserver: Link to datasheet is wrong for DN6.65xx
- [SPCMDRV-2536] Examples: Delphi examples return 0 when opening spcm1 and above
- [SPCMDRV-2542] Examples: MATLAB Std-Multi-Rec example: wrong card mode configured
- [SPCMDRV-2548] Fifo gate with PW trigger produce wrong data and timestamps
- [SPCMDRV-2550] Gated Sampling (STD and FIFO) might not work properly when switching back from FIFO_SINGLE
- [SPCMDRV-2551] Wrong demo trigger source information in Std Gate mode
- [SPCMDRV-2557] SPC_TS_RESET_WAITREFCLK with demo cards returns ERR_TIMESTAMP_SYNC
- [SPCMDRV-2560] Democards: name for M4i.6631-hbw is incorrect, M4i.6630-hbw is missing and normal M4i.6631 not selectable
- [SPCMDRV-2568] Using small loop paramter with multiple replay mode causes problems
- [SPCMDRV-2573] Incorrect handling of passwords in the security menu of the Netbox