Back
Version 5.06 Build 15415 of 21st November 2018
New File Versions
- Library - DLL V5.06
- M2i Kernel Windows V4.01
- M2i Kernel Linux V1.53
- M4i Kernel Windows V5.01
- M4i Kernel Linux V2.04
- Control Center V2.10
Improvements
- [SPCMDRV-2272] M2p.59xx Allow data conversion to reduced ADC resolution for backwards compatibility to existing software
- [SPCMDRV-2281] Support for Fedora 29
- [SPCMDRV-2282] Support for Fedora 29
- [SPCMDRV-506] Add support for M4i timestamp additional information
- [SPCMDRV-1066] Use only alligned memory for all DMA buffers in all examples
- [SPCMDRV-1295] MATLAB Examples: automatic diversion between card families
- [SPCMDRV-1296] MATLAB: using register namens internally in spcm_LibPackage also to improve readability
- [SPCMDRV-1382] Make examples more 64bit friendly
- [SPCMDRV-2001] Allow change of MemoryUsage registry value via Control Center
- [SPCMDRV-2113] reduce SR stepsize
- [SPCMDRV-2238] Example CUDA block average example for "Noise suppressed accumulation"
- [SPCMDRV-2242] Improve gain calibration accuracy at differential mode
- [SPCMDRV-2256] Linux: Add manpages to library package for easier access to function documentation
- [SPCMDRV-2260] Possibility to read out number of connectors on starhub
- [SPCMDRV-2263] Make Control Center use m4c_hardw_vers.cpp for demo card information
- [SPCMDRV-2268] Add example for CUDA without RDMA (Windows)
- [SPCMDRV-2284] Library now reports ERR_BOARDINUSE on linux systems if card is blocked by other program
- [SPCMDRV-2287] Support for 32bit wide "SPC_LOOP" value using SPC_REC_FIFO_AVERAGE and SPC_REC_FIFO_AVERAGE_16BIT
- [SPCMDRV-2292] Default demo card when add demo card changed to M2p.5962-x4
Fixed Bugs
- [SPCMDRV-2133] Opening a M4i card a second time reports "unknown 0000" as card type
- [SPCMDRV-2164] Possible crash at end of program if SCAPP/CUDA RDMA is used
- [SPCMDRV-2239] Buffer size of 4 GB causes kernel oops
- [SPCMDRV-2243] REC_FIFO_SEGSTATS transfers only fixed amount of data
- [SPCMDRV-2265] C++ Examples use "strange" parameters for external trigger setup
- [SPCMDRV-2269] Triggerlevel and coupling for M4i A/D and D/A cards not programmed from LibCard since introduction of 77xx cards
- [SPCMDRV-2270] SPCM_CUSTOMMOD not correctly handled for M2p cards
- [SPCMDRV-2271] M4Config shows Custom Modifications for M4i/M4x also on M2p cards
- [SPCMDRV-2275] CC on Win64 complains about missing spcm_win32.dll if library load failed
- [SPCMDRV-2279] M2p: Rarely PLL unlock at SHDirect after clock frequency change
- [SPCMDRV-2280] InSpec histogram test causes ERR_RUNNING on M2p.59xx with starhub
- [SPCMDRV-2285] Driver source installation script fails at library installation on RedHat
- [SPCMDRV-2291] Demo M2p.5940 leads to engine error message when started with SBench 6
- [SPCMDRV-2294] First acquisition after overrun does not trigger
- [SPCMDRV-2298] External clock might work properly on synchronized M2p cards