Back
Version 5.02 Build 14820 of 4th July 2018
New File Versions
- Library - DLL V5.02
- Library - Datasort V1.23
- M4i Kernel - Linux V2.02
- M2i Kernel - Linux V1.51
- Control Center V2.06
New Features
- [SPCMDRV-1510] M4i.77xx: add support for EXTCLK1 clock mode
- [SPCMDRV-2079] Support for Ubuntu 18.04
- [SPCMDRV-2080] Support for Ubuntu 18.04
- [SPCMDRV-2083] Support for Fedora 28
- [SPCMDRV-2084] Support for Fedora 28
- [SPCMDRV-2090] SCAPP example for DI cards
- [SPCMDRV-2096] SCAPP example for synced DI cards
- [SPCMDRV-2097] SCAPP example for synced AD cards
- [SPCMDRV-2109] Implement Trigger Holdoff for M2p cards
- [SPCMDRV-2125] Support for openSUSE 15.0
- [SPCMDRV-2126] M4i.44xx/M4x.44xx: Optional 8bit reduced sample resolution for reduced bus transfer throughput
Improvements
- [SPCMDRV-2099] Add update hint to error message driver is too old for card
- [SPCMDRV-2100] Improvements for Control Center About page
- [SPCMDRV-2110] Resolve SPC_SYNC_MODE values in log file
- [SPCMDRV-2123] Add Control Center entry to KDE5 systemsettings
- [SPCMDRV-2137] Add support for delay adjustment for M4i.44xx digital inputs
Fixed Bugs
- [SPCMDRV-2048] Configured M2p base with empty module EEPROMs shows M4i in Series Listbox.
- [SPCMDRV-2064] Read out values of SPC_OVERSAMPLINGFACTOR and SPC_CLOCKOUTFREQUENCY do not yet respect oversampling factor of M2p.59xx card
- [SPCMDRV-2069] Kernel warning when spcm4 driver module is unloaded
- [SPCMDRV-2073] Maximum for MULTI/ABA/Gate/FIFO pretrigger on M2p does not yet grow with less active channels
- [SPCMDRV-2081] Progress during firmware programming does not take post processing into account
- [SPCMDRV-2087] Script errors during library installation on Ubuntu
- [SPCMDRV-2088] Driver may lock up during spcm_vClose with a remote card
- [SPCMDRV-2089] Cannot open card in Netbox after multiple open-close cycles
- [SPCMDRV-2092] M2p.59xx trigger delay: stepsize and maximum wrong
- [SPCMDRV-2102] Current Pretrigger settings using GatedSampling not checked against hardware limits on M2p and M4i cards
- [SPCMDRV-2103] M2i.60xx: Activate only one channel on each module could produce wrong data by some chenable combinations
- [SPCMDRV-2104] M2p: FiFo recording has rarely fillsize values of zero between others
- [SPCMDRV-2105] M2p: Pulsewidth trigger missing in available mode masks
- [SPCMDRV-2108] Trigger delay not correct and also stepsize and minimum is 1 Sample for M2p.59xx cards
- [SPCMDRV-2112] Multiple EEPROM load errors under linux
- [SPCMDRV-2120] CC RPM uses wrong icon
- [SPCMDRV-2124] Error of HWDetails class (Power Cycle needed after M2p firmware update via Control Center) crashes driver
- [SPCMDRV-2128] Sometimes read out card information (like serial number) using proc is incorrect but still working when using Control Center
- [SPCMDRV-2130] Progress dialog appeared after No-card-found warning on linux
- [SPCMDRV-2131] Wrong star-hub numbers for M2p Demo cards
- [SPCMDRV-2132] Various small bugs in driver and ControlCenter for M2p cards