Suche

Sie sind hier

spcm drivers Version 3.07 build 9419 29th July 2014 | Spectrum

New File Versions

  • Library - DLL V3.07
  • Control Center V1.52
  • M2i Kernel - Linux V1.37
  • M4i Kernel - Linux V1.05

New Features

  • [SPCMDRV-492] M4i: Allow read-out of used voltages
  • [SPCMDRV-536] Firmware update for M4i cards via Control Center
  • [SPCMDRV-639] Implement Write DMA transfer to netbox
  • [SPCMDRV-767] Add support for M4i extended Firmware feature options
  • [SPCMDRV-774] M4i: Trigger counter for segmented modes
  • [SPCMDRV-792] Add M4i Star-Hub synchronization support
  • [SPCMDRV-816] Add hysteresis trigger modes for M4i channel trigger
  • [SPCMDRV-309] 64 Bit values not correctly represented in log file
  • [SPCMDRV-687] M4i.44xx: using external AC-coupling with right calibration values not possible
  • [SPCMDRV-688] Hide features that are not available on netboxes
  • [SPCMDRV-718] Ask to adopt changes If control center is closed by "x" button
  • [SPCMDRV-720] Define "register" for errors in DefTransfer and friends
  • [SPCMDRV-733] Show both kernel versions in control center
  • [SPCMDRV-737] Allow discovery even if cards are locked
  • [SPCMDRV-738] Don't show question mark in title bar
  • [SPCMDRV-740] Store index of NIC for cached cards
  • [SPCMDRV-743] Disable firmware update button for cards in netbox
  • [SPCMDRV-766] Add register for currently used express payload size
  • [SPCMDRV-787] Implement SPC_READNUMFILTERS and SPC_FILTERFREQUENCY registers for 6xxx cards
  • [SPCMDRV-789] Show location of library in debug log

Fixed Bugs

  • [SPCMDRV-617] NETBOX: simultaniously access from Control Center and SBench6 possible
  • [SPCMDRV-727] Crash if memtest is started directly after discovery
  • [SPCMDRV-728] Duplicate of netbox after addition of demo card
  • [SPCMDRV-736] Open log file button opens file multiple times
  • [SPCMDRV-739] M4i Starhub connections are listed as "broken"
  • [SPCMDRV-744] Using M4i demo cards with timestamps creates overrun error in SBench
  • [SPCMDRV-750] ControlCenter crashes at program start if two synced cards are in use by other application
  • [SPCMDRV-755] Crash if memtest is aborted
  • [SPCMDRV-762] Cannot set flag for Amplifier Module
  • [SPCMDRV-769] Layout of Version tab is messed up under linux
  • [SPCMDRV-771] Timestamp RefClock modes not available on M4i
  • [SPCMDRV-772] Minimum firmware version for trigger counter feature is wrong for M2i cards
  • [SPCMDRV-773] Check in SPC_TIMESTAMP_CMD is incomplete
  • [SPCMDRV-784] Extended features not set when editing existing demo card
  • [SPCMDRV-785] Extended features not set for demo cards
  • [SPCMDRV-794] Channels mixed up at ch trigger with SR < 1,25 GS/s (oversample mode).
  • [SPCMDRV-804] Default on-board memory for M4i demo cards 4GB instead of 256 MB
  • [SPCMDRV-805] Full Pre-Trigger size not usable with samplerates lower than 500 MHz
  • [SPCMDRV-806] Closing one card of multi-card netbox deactivates "Connected" LED
  • [SPCMDRV-813] Entry in /proc is wrong with more than one M4i card
  • [SPCMDRV-814] M2Config shows Netbox-M4i cards
  • [SPCMDRV-815] M4i Some acquisitions do not transfer data
  • [SPCMDRV-820] M4i Star Hub written although not requested
  • [SPCMDRV-822] Entry in /proc is wrong with more than one M2i card
  • [SPCMDRV-825] Incorrect error reported in case that starhub initialization resulted in zero connected boards